abbey meta info

abbey dmesg

Linux version 2.4.27-1-k7 (joshk@trollwife) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Fri Sep 3 06:21:29 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32752 pages.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hda1 ro 
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 700.056 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1395.91 BogoMIPS
Memory: 1029620k/1048512k available (1183k kernel code, 18508k reserved, 450k data, 116k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU:             Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 700.0385 MHz.
..... host bus clock speed is 200.0110 MHz.
cpu: 0, clocks: 2000110, slice: 1000055
CPU0<T0:2000096,T1:1000032,D:9,S:1000055,C:2000110>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4116 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
Freeing initrd memory: 4116k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD1200BB-18CAA0, ATA DISK drive
blk: queue f88296e0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: Host Protected Area detected.
   current capacity is 234375000 sectors (120000 MB)
   native  capacity is 234441648 sectors (120034 MB)
hda: 234375000 sectors (120000 MB) w/2048KiB Cache, CHS=232514/16/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [14589/255/63] p1 p2
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: ide0(3,1): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 13664308
ext3_orphan_cleanup: deleting unreferenced inode 13664307
ext3_orphan_cleanup: deleting unreferenced inode 13664306
ext3_orphan_cleanup: deleting unreferenced inode 13664305
ext3_orphan_cleanup: deleting unreferenced inode 13664304
ext3_orphan_cleanup: deleting unreferenced inode 13664303
ext3_orphan_cleanup: deleting unreferenced inode 13664302
ext3_orphan_cleanup: deleting unreferenced inode 13664301
ext3_orphan_cleanup: deleting unreferenced inode 13664300
ext3_orphan_cleanup: deleting unreferenced inode 13664299
ext3_orphan_cleanup: deleting unreferenced inode 13664298
ext3_orphan_cleanup: deleting unreferenced inode 13664297
ext3_orphan_cleanup: deleting unreferenced inode 13664294
ext3_orphan_cleanup: deleting unreferenced inode 13664293
ext3_orphan_cleanup: deleting unreferenced inode 13664292
ext3_orphan_cleanup: deleting unreferenced inode 13664291
ext3_orphan_cleanup: deleting unreferenced inode 13664290
ext3_orphan_cleanup: deleting unreferenced inode 13664286
ext3_orphan_cleanup: deleting unreferenced inode 13664285
ext3_orphan_cleanup: deleting unreferenced inode 13664284
ext3_orphan_cleanup: deleting unreferenced inode 13664283
ext3_orphan_cleanup: deleting unreferenced inode 13664282
ext3_orphan_cleanup: deleting unreferenced inode 13664281
ext3_orphan_cleanup: deleting unreferenced inode 13664280
ext3_orphan_cleanup: deleting unreferenced inode 13664279
ext3_orphan_cleanup: deleting unreferenced inode 13664278
ext3_orphan_cleanup: deleting unreferenced inode 13664277
ext3_orphan_cleanup: deleting unreferenced inode 13664276
ext3_orphan_cleanup: deleting unreferenced inode 13664275
ext3_orphan_cleanup: deleting unreferenced inode 13664273
ext3_orphan_cleanup: deleting unreferenced inode 13664271
ext3_orphan_cleanup: deleting unreferenced inode 13664270
ext3_orphan_cleanup: deleting unreferenced inode 13664269
ext3_orphan_cleanup: deleting unreferenced inode 13664267
ext3_orphan_cleanup: deleting unreferenced inode 13664266
ext3_orphan_cleanup: deleting unreferenced inode 7864835
ext3_orphan_cleanup: deleting unreferenced inode 787917
ext3_orphan_cleanup: deleting unreferenced inode 787910
ext3_orphan_cleanup: deleting unreferenced inode 787679
EXT3-fs: ide0(3,1): 39 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 1461872k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
spurious 8259A interrupt: IRQ7.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
Intel(R) PRO/100 Network Driver - version 2.3.43-k1
Copyright (c) 2004 Intel Corporation

PCI: Found IRQ 11 for device 00:09.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.1 $ time 06:23:50 Sep  3 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 12 for device 00:07.2
PCI: Sharing IRQ 12 with 00:07.3
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 12 for device 00:07.3
PCI: Sharing IRQ 12 with 00:07.2
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
rivafb: RIVA MTRR set to ON
Console: switching to colour frame buffer device 80x30
rivafb: PCI nVidia NV10 framebuffer ver 0.9.4 (GeForce2-MX, 32MB @ 0xD0000000)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.1 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
e100: eth0 NIC Link is Up 100 Mbps Full duplex

abbey /etc/fstab

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda1       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda2       none            swap    sw              0       0
/dev/hdc        /media/cdrom0   iso9660 ro,user,noauto  0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

abbey /etc/mtab

/dev/hda1 / ext3 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs rw 0 0
usbfs /proc/bus/usb usbfs rw 0 0

abbey /etc/network/interfaces

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
        address 192.168.2.30
        netmask 255.255.255.0
        network 192.168.2.0
        broadcast 192.168.2.255
        gateway 192.168.2.1

abbey /boot/grub/menu.lst

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.           
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      5

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default optons below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specifiv kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
# kopt=root=/dev/hda1 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery mode) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## ## End Default Options ##

title      Debian GNU/Linux, kernel 2.4.27-1-k7 
root      (hd0,0)
kernel      /boot/vmlinuz-2.4.27-1-k7 root=/dev/hda1 ro 
initrd      /boot/initrd.img-2.4.27-1-k7
savedefault
boot

title      Debian GNU/Linux, kernel 2.4.27-1-k7 (recovery mode)
root      (hd0,0)
kernel      /boot/vmlinuz-2.4.27-1-k7 root=/dev/hda1 ro single
initrd      /boot/initrd.img-2.4.27-1-k7
savedefault
boot

title      Debian GNU/Linux, kernel 2.4.26-1-686 
root      (hd0,0)
kernel      /boot/vmlinuz-2.4.26-1-686 root=/dev/hda1 ro 
initrd      /boot/initrd.img-2.4.26-1-686
savedefault
boot

title      Debian GNU/Linux, kernel 2.4.26-1-686 (recovery mode)
root      (hd0,0)
kernel      /boot/vmlinuz-2.4.26-1-686 root=/dev/hda1 ro single
initrd      /boot/initrd.img-2.4.26-1-686
savedefault
boot

### END DEBIAN AUTOMAGIC KERNELS LIST

abbey /etc/mysql/my.cnf

[client]
port      = 3306
socket      = /var/run/mysqld/mysqld.sock

# Here is entries for some specific programs
# The following values assume you have at least 32M ram

# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket      = /var/run/mysqld/mysqld.sock
nice      = 0

[mysqld]
user      = mysql
pid-file   = /var/run/mysqld/mysqld.pid
socket      = /var/run/mysqld/mysqld.sock
port      = 3306
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
#log      = /var/log/mysql.log
#log      = /var/log/mysql/mysql.log
# Error logging goes to syslog. This is a Debian improvement :)
basedir      = /usr
datadir      = /var/lib/mysql
tmpdir      = /tmp
language   = /usr/share/mysql/english
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
bind-address            = 127.0.0.1
key_buffer      = 16M
max_allowed_packet   = 16M
thread_stack      = 128K
#
# Query Cache Configuration
#
query_cache_limit   = 1048576
query_cache_size        = 16777216
query_cache_type        = 1
#
# Here you can see queries with especially long duration
#log-slow-queries   = /var/log/mysql/mysql-slow.log
#
# The following can be used as easy to replay backup logs or for replication.
#server-id      = 1
log-bin         = /var/log/mysql/mysql-bin.log
# See /etc/mysql/debian-log-rotate.conf for the number of files kept.
max_binlog_size      = 104857600

[mysqldump]
quick
quote-names
max_allowed_packet   = 16M

[mysql]
#no-auto-rehash   # faster start of mysql but no tab completition

[isamchk]
key_buffer      = 16M

abbey /etc/postgresql/postgresql.conf

# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The '=' is optional.) White space may be used. Comments are introduced
# with '#' anywhere on a line. The complete list of option names and
# allowed values can be found in the PostgreSQL documentation. The
# commented-out settings shown in this file represent the default values.
#
# Any option can also be given as a command line switch to the
# postmaster, e.g. 'postmaster -c log_connections=on'. Some options
# can be changed at run-time with the 'SET' SQL command.
#
# This file is read on postmaster startup and when the postmaster
# receives a SIGHUP. If you edit the file on a running system, you have 
# to SIGHUP the postmaster for the changes to take effect, or use 
# "pg_ctl reload".


#---------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#---------------------------------------------------------------------------

# - Connection Settings -

tcpip_socket = true
#max_connections = 100
   # note: increasing max_connections costs about 500 bytes of shared
   # memory per connection slot, in addition to costs from shared_buffers
        # and max_locks_per_transaction.
#superuser_reserved_connections = 2
#port = 5432
#unix_socket_directory = ''
#unix_socket_group = ''
#unix_socket_permissions = 0777   # octal
#virtual_host = ''      # what interface to listen on; defaults to any
#rendezvous_name = ''      # defaults to the computer name

# - Security & Authentication -

#authentication_timeout = 60   # 1-600, in seconds
#ssl = false
#password_encryption = true
#krb_server_keyfile = ''
#db_user_namespace = false


#---------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#---------------------------------------------------------------------------

# - Memory -

#shared_buffers = 1000      # min 16, at least max_connections*2, 8KB each
#sort_mem = 1024      # min 64, size in KB
#vacuum_mem = 8192      # min 1024, size in KB

# - Free Space Map -

#max_fsm_pages = 20000      # min max_fsm_relations*16, 6 bytes each
#max_fsm_relations = 1000   # min 100, ~50 bytes each

# - Kernel Resource Usage -

#max_files_per_process = 1000   # min 25
#preload_libraries = ''


#---------------------------------------------------------------------------
# WRITE AHEAD LOG
#---------------------------------------------------------------------------

# - Settings -

# A special note on FSYNC:
# FSYNC only affects writes to the WAL (Write-Ahead Log).  Turning it
# off will give some increase in performance, but at the risk of data-
# corruption in the event of power failure or other disaster.  It is on
# by default.  I strongly recommend you not to turn it off.
#fsync = true         # turns forced synchronization on or off
#wal_sync_method = fsync   # the default varies across platforms:
            # fsync, fdatasync, open_sync, or open_datasync
            # open_sync and open_dsync are synonymous in
            # Linux. fdatasync is less expensive than
            # fsync, but does not sync file metadata
#wal_buffers = 8      # min 4, 8KB each

# - Checkpoints -

#checkpoint_segments = 3   # in logfile segments, min 1, 16MB each
#checkpoint_timeout = 300   # range 30-3600, in seconds
#checkpoint_warning = 30   # 0 is off, in seconds
#commit_delay = 0      # range 0-100000, in microseconds
#commit_siblings = 5      # range 1-1000


#---------------------------------------------------------------------------
# QUERY TUNING
#---------------------------------------------------------------------------

# - Planner Method Enabling -

#enable_hashagg = true
#enable_hashjoin = true
#enable_indexscan = true
#enable_mergejoin = true
#enable_nestloop = true
#enable_seqscan = true
#enable_sort = true
#enable_tidscan = true

# - Planner Cost Constants -

#effective_cache_size = 1000   # typically 8KB each
#random_page_cost = 4      # units are one sequential page fetch cost
#cpu_tuple_cost = 0.01      # (same)
#cpu_index_tuple_cost = 0.001   # (same)
#cpu_operator_cost = 0.0025   # (same)

# - Genetic Query Optimizer -

#geqo = true
#geqo_threshold = 11
#geqo_effort = 1
#geqo_generations = 0
#geqo_pool_size = 0      # default based on tables in statement,
            # range 128-1024
#geqo_selection_bias = 2.0   # range 1.5-2.0

# - Other Planner Options -

#default_statistics_target = 10   # range 1-1000
#from_collapse_limit = 8
#join_collapse_limit = 8   # 1 disables collapsing of explicit JOINs


#---------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#---------------------------------------------------------------------------

# - Syslog -

syslog = 0         # range 0-2; 0=stdout; 1=both; 2=syslog
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'

# - When to Log -

#client_min_messages = notice   # Values, in order of decreasing detail:
            #   debug5, debug4, debug3, debug2, debug1,
            #   log, info, notice, warning, error

#log_min_messages = notice   # Values, in order of decreasing detail:
            #   debug5, debug4, debug3, debug2, debug1,
            #   info, notice, warning, error, log, fatal,
            #   panic

#log_error_verbosity = default   # terse, default, or verbose messages

#log_min_error_statement = panic # Values in order of increasing severity:
             #   debug5, debug4, debug3, debug2, debug1,
             #   info, notice, warning, error, panic(off)
             
#log_min_duration_statement = -1 # Log all statements whose
             # execution time exceeds the value, in
             # milliseconds.  -1 disables. Zero logs
             # all statements.

silent_mode = false        # DO NOT USE without Syslog!

# - What to Log -

#debug_print_parse = false
#debug_print_rewritten = false
#debug_print_plan = false
#debug_pretty_print = false
log_connections = true
#log_duration = false
log_pid = true
#log_statement = false
log_timestamp = true
#log_hostname = false
#log_source_port = false


#---------------------------------------------------------------------------
# RUNTIME STATISTICS
#---------------------------------------------------------------------------

# - Statistics Monitoring -

#log_parser_stats = false
#log_planner_stats = false
#log_executor_stats = false
#log_statement_stats = false

# - Query/Index Statistics Collector -

stats_start_collector = true
#stats_command_string = false
#stats_block_level = false
stats_row_level = true
#stats_reset_on_server_start = true


#---------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#---------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '$user,public'   # schema names
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = false
#statement_timeout = 0      # 0 is disabled, in milliseconds

# - Locale and Formatting -

# How (by default) to present dates to the frontend; the user can override
# this setting for his own session. The choices are:
#   Style      Date            Timestamptz
#   ----------------------------------------------------------------
#   ISO        1999-07-17      1999-07-17 07:09:18+01
#   SQL        17/07/1999      17/07/1999 07:09:19 BST
#   POSTGRES   17-07-1999      Sat 17 Jul 07:09:19 1999 BST
#   GERMAN     17.07.1999      17.07.1999 07:09:19 BST
#
# It is also possible to specify month-day or day-month ordering in date
# input and output.  Americans tend to use month-day; Europeans use
# day-month.  Specify European or US, or specify the order with DMY, MDY or
# YMD.  This is used for interpreting date input, even if the output format
# is ISO.  Separate the two parameters by a comma with no spaces.
datestyle = 'ISO,European'
#timezone = unknown      # actually, defaults to TZ environment setting
#australian_timezones = false
#extra_float_digits = 0      # min -15, max 2
#client_encoding = sql_ascii   # actually, defaults to database encoding

# These settings are initialized by initdb -- they may be changed
#lc_messages = 'C'      # locale for system error message strings
#lc_monetary = 'C'      # locale for monetary formatting
#lc_numeric = 'C'      # locale for number formatting
#lc_time = 'C'         # locale for time formatting

# - Other Defaults -

#explain_pretty_print = true
dynamic_library_path = '/usr/share/postgresql:/usr/lib/postgresql:/usr/lib/postgresql/lib'
#max_expr_depth = 10000      # min 10


#---------------------------------------------------------------------------
# LOCK MANAGEMENT
#---------------------------------------------------------------------------

#deadlock_timeout = 1000   # in milliseconds
#max_locks_per_transaction = 64   # min 10, ~260*max_connections bytes each


#---------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#---------------------------------------------------------------------------

# - Previous Postgres Versions -

#add_missing_from = true
#regex_flavor = advanced   # advanced, extended, or basic
#sql_inheritance = true

# - Other Platforms & Clients -

#transform_null_equals = false

abbey lspci

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
0000:00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)

-- JohnF - 31 May 2005

This topic: Sysadmin > WebHome > AbbeyMetaInfo
Topic revision: 31 May 2005, JohnF
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback