ahimsa-jojojojojojo.indymedia.org metainfo page

ahimsa-jojojojojojo dmesg

Linux version 2.6.10-1.9_FC2 (bhcompile@porky.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Thu Jan 13 17:54:57 EST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
 BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
 BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 524016
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 294640 pages, LIFO batch:16
DMI 2.3 present.
Built 1 zonelists
Kernel command line: ro root=/dev/hda5 acpi=off
Initializing CPU#0
CPU 0 irqstacks, hard=c03d8000 soft=c03d7000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2795.205 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074156k/2096064k available (2028k kernel code, 20984k reserved, 684k data, 168k init, 1178560k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5521.40 BogoMIPS (lpj=2760704)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 281k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb840, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: ACPI disable
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/25a1] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 5 for device 0000:00:1f.1
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1105721959.894:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key CC3710639B8E50B6
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i875 Chipset.
agpgart: Maximum main memory to use for agp memory: 1918M
agpgart: AGP aperture is 256M @ 0xe0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.2 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 5 for device 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST380013A, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SR244W, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
3ware 9000 Storage Controller device driver for Linux v2.26.02.001.
PCI: Found IRQ 11 for device 0000:02:02.0
IRQ routing conflict for 0000:02:02.0, have irq 9, want irq 11
PCI: Sharing IRQ 11 with 0000:03:09.0
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xf1800000, IRQ: 9.
3w-9xxx: scsi0: Firmware FE9X 2.02.00.008, BIOS BE9X 2.02.01.037, Ports: 12.
  Vendor: 3ware     Model: Logical Disk 00   Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 3515424768 512-byte hdwr sectors (1799897 MB)
SCSI device sda: drive cache: none
SCSI device sda: 3515424768 512-byte hdwr sectors (1799897 MB)
SCSI device sda: drive cache: none
 sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 168k freed
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
EXT3 FS on hda5, internal journal
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ide: failed opcode was 100
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Parameter not supported -- (asc=0x26, ascq=0x01)
  The failed "Start/Stop Unit" packet command was: 
  "1b 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 "
Adding 2096440k swap on /dev/hda9.  Priority:-1 extents:1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1

ahimsa-jojojojojojo lspci

00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02)
00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 0a)
00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
01:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet Controller
02:02.0 RAID bus controller: 3ware Inc 3ware ATA-RAID
03:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09)
03:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
03:0a.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller

ahimsa-jojojojojojo /etc/fstab

/dev/hda5               /                       ext3    defaults        1 1
/dev/hda1               /boot                   ext3    defaults        1 2
none                    /dev/pts                devpts  gid=5,mode=620  0 0
none                    /dev/shm                tmpfs   defaults        0 0
#/dev/hda2              /freedos                vfat    defaults        0 0
/dev/hda10               /home                   ext3    defaults        1 2
none                    /proc                   proc    defaults        0 0
none                    /sys                    sysfs   defaults        0 0
/dev/hda7               /tmp                    ext3    defaults        1 2
/dev/hda3               /usr                    ext3    defaults        1 2
/dev/hda6               /var                    ext3    defaults        1 2
/dev/hda9               swap                    swap    defaults        0 0
/dev/sda1               /tera                   xfs     defaults        1 2
/dev/cdrom              /mnt/cdrom              udf,iso9660 noauto,owner,kudzu,ro 0 0

ahimsa-jojojojojojo /etc/mtab

/dev/hda5 / ext3 rw 0 0
none /proc proc rw 0 0
none /sys sysfs rw 0 0
none /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/hda1 /boot ext3 rw 0 0
none /dev/shm tmpfs rw 0 0
/dev/hda10 /home ext3 rw 0 0
/dev/hda7 /tmp ext3 rw 0 0
/dev/hda3 /usr ext3 rw 0 0
/dev/hda6 /var ext3 rw 0 0
/dev/sda1 /tera xfs rw 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
nfsd /proc/fs/nfsd nfsd rw 0 0

ahimsa-jojojojojojo /etc/exports

# ahimsa-db1
/tera/BACKUPS/IMC/database 10.1.44.12(rw,no_root_squash,sync)
/tera/BACKUPS/database/db1 10.1.44.12(rw,no_root_squash,sync)
# ahimsa-db1 - different NIC
/tera/BACKUPS/IMC/database 10.1.42.12(rw,no_root_squash,sync)
/tera/BACKUPS/database/db1 10.1.42.12(rw,no_root_squash,sync)
# just nfsv4 testing for db1
/tera/ivdn 10.1.44.12(rw,fsid=0,root_squash,insecure,no_subtree_check,sync)
# lab20
/tera/blag 10.1.44.204(rw,no_root_squash,sync)
/tera/BACKUPS/IMC/database 10.1.44.204(rw,no_root_squash,sync)
/tera/BACKUPS/database/lab20 10.1.44.204(rw,no_root_squash,sync)
# ahimsa-web1
/tera/imc 10.1.44.7(rw,no_root_squash,sync)
/tera/ivdn 10.1.44.7(rw,fsid=0,root_squash,insecure,no_subtree_check,sync)
/tera/rackspace/ahimsa2/imc 10.1.44.7(ro,root_squash,sync)
/tera/rackspace/ahimsa1/mirrors/raid2/radio.uk1.indymedia.org 10.1.44.7(ro,root_squash,sync)
/tera/BACKUPS/IMC/database 10.1.44.7(ro,no_root_squash,sync)
# ahimsa-rsync1 Gigabit interface
/tera/imc 10.1.44.8(rw,no_root_squash,sync)
/tera/ivdn 10.1.44.8(rw,no_root_squash,sync)
/tera/BACKUPS/IMC/database 10.1.44.8(ro,no_root_squash,sync)
# ahimsa-rsync1 100BT interface
/tera/imc 10.1.33.8(rw,no_root_squash,sync)
/tera/ivdn 10.1.33.8(rw,no_root_squash,sync)
/tera/BACKUPS/IMC/database 10.1.33.8(ro,no_root_squash,sync)
# blag-devel (italy temporary....)
/tera/imc 10.1.44.38(rw,no_root_squash,sync)
/tera/BACKUPS/IMC/database 10.1.44.38(ro,no_root_squash,sync)

ahimsa-jojojojojojo /etc/modprobe.conf

alias eth0 e1000
alias eth1 e1000
alias scsi_hostadapter1 3w-9xxx
alias net-pf-10 off

# I2C module options
alias char-major-89 i2c-dev
#alias eth2 tg3

ahimsa-jojojojojojo /etc/hosts.allow

portmap : 127. 10.1.44. 10.1.33. 216.17.145. : ALLOW
portmap : ALL : DENY

ahimsa-jojojojojojo /etc/idmapd.conf

[General]

Verbosity = 0 
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain

[Mapping]

Nobody-User = nfsnobody
Nobody-Group = nfsnobody

ahimsa-jojojojojojo /etc/sysconfig/network-scripts/

  • ifcfg-eth0
# Intel Corp.|82547GI Gigabit Ethernet Controller
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.1.44.255
HWADDR=00:30:48:80:49:E9
IPADDR=10.1.44.3
NETMASK=255.255.255.0
NETWORK=10.1.44.0
ONBOOT=yes
TYPE=Ethernet

  • ifcfg-eth1
# Intel Corp.|82541GI/PI Gigabit Ethernet Controller
DEVICE=eth1
BOOTPROTO=static
BROADCAST=216.17.145.127
HWADDR=00:30:48:80:49:EA
IPADDR=216.17.145.3
NETMASK=255.255.255.128
NETWORK=216.17.145.0
ONBOOT=yes
TYPE=Ethernet

  • ifcfg-eth1:0
# Intel Corp.|82541GI/PI Gigabit Ethernet Controller
DEVICE=eth1:0
BOOTPROTO=static
BROADCAST=10.1.33.255
HWADDR=00:30:48:80:49:EA
IPADDR=10.1.33.3
NETMASK=255.255.255.0
NETWORK=10.1.33.3
ONBOOT=yes
TYPE=Ethernet

ahimsa-jojojojojojo /boot/grub/grub.conf

# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/hda5
#          initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=3
splashimage=(hd0,0)/grub/splash.xpm.gz
title Fedora Core (2.6.10-1.9_FC2)
        root (hd0,0)
        kernel /vmlinuz-2.6.10-1.9_FC2 ro root=/dev/hda5 acpi=off
        initrd /initrd-2.6.10-1.9_FC2.img
title Fedora Core (2.6.9-1.11_FC2)
        root (hd0,0)
        kernel /vmlinuz-2.6.9-1.11_FC2 ro root=/dev/hda5 acpi=off
        initrd /initrd-2.6.9-1.11_FC2.img
title BLAG20k (2.6.9-1.6_FC2)
        root (hd0,0)
        kernel /vmlinuz-2.6.9-1.6_FC2 ro root=/dev/hda5 acpi=off
        initrd /initrd-2.6.9-1.6_FC2.img
title BLAG19999.00081 (2.6.8-1.521)
        root (hd0,0)
        kernel /vmlinuz-2.6.8-1.521 ro root=/dev/hda5 acpi=off
        initrd /initrd-2.6.8-1.521.img
title BLAG (2.6.8.1-4jojo)
        root (hd0,0)
        kernel /vmlinuz-2.6.8.1-4jojo ro root=/dev/hda5
title BLAG (2.6.8.1-3jojo-no3ware
        root (hd0,0)
        kernel /vmlinuz-2.6.8.1-3jojo-no3ware ro root=/dev/hda5
title BLAG (2.6.8.1-2jojo)
        root (hd0,0)
        kernel /vmlinuz-2.6.8.1-2jojo ro root=/dev/hda5
title BLAG (2.6.8.1)
        root (hd0,0)
        kernel /vmlinuz-2.6.8.1 ro root=/dev/hda5
title freedos
        rootnoverify (hd0,1)
        chainloader +1

-- JebbaJebba - 17 Jan 2005

This topic: Sysadmin > WebHome > AhimsaJojojojojojoMetaInfo
Topic revision: 17 Jan 2005, JebbaJebba
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback