Che Information

Services hosted by che:

docs.indymedia.org - this wiki, documentation and materials

chat.indymedia.org - webinterface for the Indymedia IRC Server

irc.indymedia.org - the IRC Server for Indymedia

Che System Information

Che dmesg



inux version 2.4.21 (root@che) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 SMP Sun Jun 29 16:00:16 PDT 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001ffffc00 (ACPI data)
 BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffe9400 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f7330
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: HP       Product ID: LPr          APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #0 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat.   Using 1 I/O APICs
Processors: 1
Kernel command line: root=/dev/sda5
Initializing CPU#0
Detected 698.818 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1395.91 BogoMIPS
Memory: 515868k/524224k available (1198k kernel code, 7964k reserved, 547k data, 100k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 03
per-CPU timeslice cutoff: 731.81 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 0 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 0 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 0-0, 0-10, 0-11, 0-16, 0-17, 0-20, 0-21, 0-22, 0-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 17.
number of IO-APIC #0 registers: 24.
testing the IO APIC.......................

IO APIC #0......
.... register #00: 00000000
.......    : physical APIC id: 00
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 001 01  0    0    0   0   0    1    1    31
 01 001 01  0    0    0   0   0    1    1    39
 02 000 00  1    0    0   0   0    0    0    00
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    79
 0d 001 01  0    0    0   0   0    1    1    81
 0e 001 01  0    0    0   0   0    1    1    89
 0f 001 01  0    0    0   0   0    1    1    91
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 001 01  1    1    0   1   0    1    1    99
 13 001 01  1    1    0   1   0    1    1    A1
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 698.7837 MHz.
..... host bus clock speed is 99.8260 MHz.
cpu: 0, clocks: 998260, slice: 499130
CPU0<T0:998256,T1:499120,D:6,S:499130,C:998260>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfdb02, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:04.0
PCI->APIC IRQ transform: (B0,I4,P3) -> 19
PCI->APIC IRQ transform: (B1,I3,P0) -> 19
PCI->APIC IRQ transform: (B1,I4,P0) -> 18
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.5 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:C3:FF:C4, IRQ 19.
  Board assembly 733470-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:DMA
hda: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-cdrom driver.
hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
sym0: <895> rev 0x1 on pci bus 1 device 4 function 0 irq 18
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
blk: queue c15a3218, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: HP        Model: 18.2GB C 80-D84D  Rev: D84D
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue c15a3018, I/O limit 4095Mb (mask 0xffffffff)
  Vendor: HP        Model: 18.2GB C 80-D84D  Rev: D84D
  Type:   Direct-Access                      ANSI SCSI revision: 02
blk: queue c15ecc18, I/O limit 4095Mb (mask 0xffffffff)
sym0:0:0: tagged command queuing enabled, command queue depth 16.
sym0:1:0: tagged command queuing enabled, command queue depth 16.
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sym0:0: FAST-40 SCSI 40.0 MB/s ST (25.0 ns, offset 31)
SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
Partition check:
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
sym0:1: FAST-40 SCSI 40.0 MB/s ST (25.0 ns, offset 31)
SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
 sdb: sdb1
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 100k freed
Adding Swap: 979924k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
netwatch uses obsolete (PF_INET,SOCK_PACKET)
device eth0 entered promiscuous mode
TCP: drop open request from 66.32.162.224/3556
TCP: drop open request from 66.32.162.224/3557
sending pkt_too_big (len[1500] pmtu[1488]) to self
sending pkt_too_big (len[1500] pmtu[1488]) to self

Che fstab


<file system> <mount point> <type> <options> <dump> <pass>
/dev/sda5     /         ext3   defaults,errors=remount-ro   0 1
/dev/sda9     none      swap   sw                           0 0
proc          /proc     proc   defaults                     0 0
/dev/fd0      /floppy   auto   defaults,user,noauto         0 0
/dev/cdrom    /cdrom    iso9660 defaults,ro,user,noauto     0 0
/dev/sda1     /boot     ext2    ro,nosuid,nodev,noexec,sync 0 2
/dev/sda6     /usr      ext3    rw                          0 2
/dev/sda7     /tmp      ext2    defaults,nosuid,noexec      0 2
/dev/sda8     /home     ext3    rw                          0 2
/dev/sda10    /var      ext2    rw                          0 2

Che grub menu.lst


# Boot automatically after 30 secs.
timeout 5
password --md5 $1XXXXXXXXXXXXXXXXXXXXXXXXXXXX

# By default, boot the first entry.
default 2

color white/blue blue/green

title Debian GNU/Linux [2.2.19]
kernel (hd0,0)/vmlinuz-2.2.19pre17 root=/dev/sda5

title Debian GNU/Linux [2.4.20]
kernel (hd0,0)/vmlinuz-2.4.20 root=/dev/sda5

title Debian GNU/Linux [2.4.21]
kernel (hd0,0)/vmlinuz-2.4.21 root=/dev/sda5

Network and environmental stats

Traffic Analysis is here: http://riseup.net/mrtg/IMC/che.indymedia.org_2.html

Munin Stats: http://ibis.riseup.net/munin/indymedia.org/index.html

-- StefaniB - 21 Jul 2003

-- MatRiseup Added stats links - 23 Aug 2004

This topic: Sysadmin > WebHome > CheInfo
Topic revision: 23 Aug 2004, MatRiseup
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback