Sarai's Meta Information

Sarai NewSaraiCfg2html

Sarai's dmesg

personality registered 
raid1 personality registered 
raid5 personality registered 
raid5: measuring checksumming speed 
raid5: MMX detected, trying high-speed MMX checksum routines 
   pII_mmx   :  2091.690 MB/sec 
   p5_mmx    :  2628.138 MB/sec 
   8regs     :  1369.695 MB/sec 
   32regs    :   963.168 MB/sec 
using fastest function: p5_mmx (2628.138 MB/sec) 
scsi : 0 hosts. 
scsi : detected total. 
3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html 
eth0: 3Com 3c900 Cyclone 10Mbps TPO at 0xec00,  00:50:da:29:90:2d, IRQ 11 
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. 
  MII transceiver found at address 24, status 182d. 
  Enabling bus-master transmits and whole-frame receives. 
md.c: sizeof(mdp_super_t) = 4096 
Partition check: 
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > 
 hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 > 
autodetecting RAID arrays 
(read) hda3's sb offset: 449728 [events: 0000005f] 
(read) hdc3's sb offset: 449728 [events: 0000005f] 
autorun ... 
considering hdc3 ... 
  adding hdc3 ... 
  adding hda3 ... 
created md1 
bind<hda3,1> 
bind<hdc3,2> 
running: <hdc3><hda3> 
now! 
hdc3's event counter: 0000005f 
hda3's event counter: 0000005f 
md: md1: raid array is not clean -- starting background reconstruction 
md1: max total readahead window set to 128k 
md1: 1 data-disks, max readahead per data-disk: 128k 
raid1: device hdc3 operational as mirror 1 
raid1: device hda3 operational as mirror 0 
raid1: raid set md1 not clean; reconstructing mirrors 
raid1: raid set md1 active with 2 out of 2 mirrors 
md: updating md1 RAID superblock on device 
hdc3 [events: 00000060](write) hdc3's sb offset: 449728 
md: syncing RAID array md1 
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec. 
md: using maximum available idle IO bandwith for reconstruction. 
md: using 128k window. 
hda3 [events: 00000060](write) hda3's sb offset: 449728 
. 
... autorun DONE. 
VFS: Mounted root (ext2 filesystem) readonly. 
Freeing unused kernel memory: 64k freed 
(read) hda1's sb offset: 15936 [events: 00000055] 
(read) hdc1's sb offset: 15936 [events: 00000055] 
autorun ... 
considering hdc1 ... 
  adding hdc1 ... 
  adding hda1 ... 
created md0 
bind<hda1,1> 
bind<hdc1,2> 
running: <hdc1><hda1> 
now! 
hdc1's event counter: 00000055 
hda1's event counter: 00000055 
md: md0: raid array is not clean -- starting background reconstruction 
md0: max total readahead window set to 128k 
md0: 1 data-disks, max readahead per data-disk: 128k 
raid1: device hdc1 operational as mirror 1 
raid1: device hda1 operational as mirror 0 
raid1: raid set md0 not clean; reconstructing mirrors 
raid1: raid set md0 active with 2 out of 2 mirrors 
md: updating md0 RAID superblock on device 
hdc1 [events: 00000056](write) hdc1's sb offset: 15936 
md: serializing resync, md0 has overlapping physical units with md1! 
hda1 [events: 00000056](write) hda1's sb offset: 15936 
. 
... autorun DONE. 
(read) hda5's sb offset: 5855552 [events: 00000061] 
(read) hdc5's sb offset: 5855552 [events: 00000061] 
autorun ... 
considering hdc5 ... 
  adding hdc5 ... 
  adding hda5 ... 
created md2 
bind<hda5,1> 
bind<hdc5,2> 
running: <hdc5><hda5> 
now! 
hdc5's event counter: 00000061 
hda5's event counter: 00000061 
md: md2: raid array is not clean -- starting background reconstruction 
md2: max total readahead window set to 128k 
md2: 1 data-disks, max readahead per data-disk: 128k 
raid1: device hdc5 operational as mirror 1 
raid1: device hda5 operational as mirror 0 
raid1: raid set md2 not clean; reconstructing mirrors 
raid1: raid set md2 active with 2 out of 2 mirrors 
md: updating md2 RAID superblock on device 
hdc5 [events: 00000062](write) hdc5's sb offset: 5855552 
md: serializing resync, md2 has overlapping physical units with md1! 
hda5 [events: 00000062](write) hda5's sb offset: 5855552 
. 
... autorun DONE. 
(read) hda6's sb offset: 489856 [events: 00000063] 
(read) hdc6's sb offset: 489856 [events: 00000063] 
autorun ... 
considering hdc6 ... 
  adding hdc6 ... 
  adding hda6 ... 
created md3 
bind<hda6,1> 
bind<hdc6,2> 
running: <hdc6><hda6> 
now! 
hdc6's event counter: 00000063 
hda6's event counter: 00000063 
md: md3: raid array is not clean -- starting background reconstruction 
md3: max total readahead window set to 128k 
md3: 1 data-disks, max readahead per data-disk: 128k 
raid1: device hdc6 operational as mirror 1 
raid1: device hda6 operational as mirror 0 
raid1: raid set md3 not clean; reconstructing mirrors 
raid1: raid set md3 active with 2 out of 2 mirrors 
md: updating md3 RAID superblock on device 
hdc6 [events: 00000064](write) hdc6's sb offset: 489856 
md: serializing resync, md3 has overlapping physical units with md1! 
hda6 [events: 00000064](write) hda6's sb offset: 489856 
. 
... autorun DONE. 
(read) hda7's sb offset: 96256 [events: 00000065] 
(read) hdc7's sb offset: 96256 [events: 00000065] 
autorun ... 
considering hdc7 ... 
  adding hdc7 ... 
  adding hda7 ... 
created md4 
bind<hda7,1> 
bind<hdc7,2> 
running: <hdc7><hda7> 
now! 
hdc7's event counter: 00000065 
hda7's event counter: 00000065 
md: md4: raid array is not clean -- starting background reconstruction 
md4: max total readahead window set to 128k 
md4: 1 data-disks, max readahead per data-disk: 128k 
raid1: device hdc7 operational as mirror 1 
raid1: device hda7 operational as mirror 0 
raid1: raid set md4 not clean; reconstructing mirrors 
raid1: raid set md4 active with 2 out of 2 mirrors 
md: updating md4 RAID superblock on device 
hdc7 [events: 00000066](write) hdc7's sb offset: 96256 
 
 
 
md: serializing resync, md4 has overlapping physical units with md1! 
hda7 [events: 00000066](write) hda7's sb offset: 96256 
. 
... autorun DONE. 
(read) hda8's sb offset: 32804608 [events: 00000061] 
(read) hdc8's sb offset: 32804608 [events: 00000061] 
autorun ... 
considering hdc8 ... 
  adding hdc8 ... 
  adding hda8 ... 
created md5 
bind<hda8,1> 
bind<hdc8,2> 
running: <hdc8><hda8> 
now! 
hdc8's event counter: 00000061 
hda8's event counter: 00000061 
md: md5: raid array is not clean -- starting background reconstruction 
md5: max total readahead window set to 128k 
md5: 1 data-disks, max readahead per data-disk: 128k 
raid1: device hdc8 operational as mirror 1 
raid1: device hda8 operational as mirror 0 
raid1: raid set md5 not clean; reconstructing mirrors 
raid1: raid set md5 active with 2 out of 2 mirrors 
md: updating md5 RAID superblock on device 
hdc8 [events: 00000062](write) hdc8's sb offset: 32804608 
md: serializing resync, md5 has overlapping physical units with md1! 
hda8 [events: 00000062](write) hda8's sb offset: 32804608 
. 
... autorun DONE. 
eth0: Initial media type Autonegotiate. 
eth0: MII #24 status 182d, link partner capability 41e1, setting full-duplex. 
md: md1: sync done. 
md: syncing RAID array md0 
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec. 
md: using maximum available idle IO bandwith for reconstruction. 
md: using 128k window. 
md: serializing resync, md2 has overlapping physical units with md0! 
md: serializing resync, md3 has overlapping physical units with md0! 
md: serializing resync, md4 has overlapping physical units with md0! 
md: serializing resync, md5 has overlapping physical units with md0! 
md: md0: sync done. 
md: syncing RAID array md2 
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec. 
md: using maximum available idle IO bandwith for reconstruction. 
md: using 128k window. 
md: serializing resync, md3 has overlapping physical units with md2! 
md: serializing resync, md4 has overlapping physical units with md2! 
md: serializing resync, md5 has overlapping physical units with md2! 
Adding Swap: 489972k swap-space (priority 1) 
Adding Swap: 489972k swap-space (priority 1) 

Sarai fstab

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/sda5       /       ext2   defaults,errors=remount-ro     0  1
/dev/sda9       none    swap   sw                             0  0
proc            /proc   proc   defaults                       0  0
/dev/fd0        /floppy auto    defaults,user,noauto          0  0
/dev/cdrom      /cdrom  iso9660 defaults,ro,user,noauto       0  0
/dev/sda1       /boot   ext2   ro,nosuid,nodev,noexec,sync    0  2
/dev/sda6       /usr    ext2   rw,sync,suid,exec,nouser       0  2
/dev/sda7       /tmp    ext2   rw,nosuid,nodev,noexec         0  2
/dev/vg01/home  /home   ext3   rw                             0  2
/dev/sda10      /var    ext2   rw,nosuid,nodev,sync,noatime   0  2
/dev/vg01/mailman /mailman ext3 rw,nodev,sync,noatime         0  2
#/dev/sda8      /home   ext2   rw                             0  2

Sarai /etc/mtab

/dev/sda5 / ext2 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/sda1 /boot ext2 ro,noexec,nosuid,nodev,sync 0 0
/dev/sda6 /usr ext2 rw,sync 0 0
/dev/sda7 /tmp ext2 rw,noexec,nosuid,nodev 0 0
/dev/vg01/home /home ext3 rw 0 0
/dev/sda10 /var ext2 rw,nosuid,nodev,sync,noatime 0 0
/dev/vg01/mailman /mailman ext3 rw,nodev,sync,noatime 0 0

Sarai /etc/network/interfaces

# automatically added when upgrading
auto eth0
iface eth0 inet static
        address 207.229.92.161
        netmask 255.255.255.0
        network 207.229.92.0
        broadcast 207.229.92.255
        gateway 207.229.92.1

Sarai /boot/grub/menu.lst

# Boot automatically after 30 secs.
timeout 5
password --md5 $1$xxxxxxxxxxxxxxxxxxxx

# By default, boot the first entry.
# By default, boot "third" entry.
default 2

color white/blue blue/green

title Debian GNU/Linux [2.2.19] 
kernel (hd0,0)/vmlinuz-2.2.19pre17 root=/dev/sda5

title Debian GNU/Linux [2.4.20]
kernel (hd0,0)/vmlinuz-2.4.20.old root=/dev/sda5 

title Debian GNU/Linux [2.4.20iptables]
kernel (hd0,0)/vmlinuz-2.4.20 root=/dev/sda5