Staughton's Meta Information

StaughtonCfg2html

Staughton's dmesg

Linux version 2.4.18-1-686-smp (joey@gluck) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Wed Apr 14 18:42:49 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f1694 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000a000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff1694 - 0000000100000000 (reserved)
found SMP MP-table at 000fd5b0
hm, page 000fd000 reserved twice.
hm, page 000fe000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 40960
zone(0): 4096 pages.
zone(1): 36864 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: DEC    Product ID: OMEGA        APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: auto BOOT_IMAGE=Linux ro root=303
Initializing CPU#0
Detected 199.315 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 397.31 BogoMIPS
Memory: 156400k/163840k available (902k kernel code, 7052k reserved, 250k data, 216k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0000fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0000fbff 00000000 00000000 00000000
CPU:             Common caps: 0000fbff 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0000fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0000fbff 00000000 00000000 00000000
CPU:             Common caps: 0000fbff 00000000 00000000 00000000
CPU0: Intel Pentium Pro stepping 09
per-CPU timeslice cutoff: 730.16 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 398.13 BogoMIPS
CPU: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0000fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0000fbff 00000000 00000000 00000000
CPU:             Common caps: 0000fbff 00000000 00000000 00000000
CPU1: Intel Pentium Pro stepping 09
Total of 2 processors activated (795.44 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map 
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  0    0    0   0   0    1    1    61
 08 003 03  0    0    0   0   0    1    1    69
 09 003 03  0    0    0   0   0    1    1    71
 0a 003 03  1    1    0   1   0    1    1    79
 0b 003 03  0    0    0   0   0    1    1    81
 0c 003 03  0    0    0   0   0    1    1    89
 0d 003 03  0    0    0   0   0    1    1    91
 0e 003 03  0    0    0   0   0    1    1    99
 0f 003 03  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 199.3149 MHz.
..... host bus clock speed is 66.4380 MHz.
cpu: 0, clocks: 664380, slice: 221460
CPU0<T0:664368,T1:442896,D:12,S:221460,C:664380>
cpu: 1, clocks: 664380, slice: 221460
CPU1<T0:664368,T1:221440,D:8,S:221460,C:664380>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf748d, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd 
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2668 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 2668k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 216k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Journalled Block Device driver loaded
keyboard: Timeout - AT keyboard not present?(ed)
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100%% native mode: will probe irqs later
    ide0: BM-DMA at 0xecf0-0xecf7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xecf8-0xecff, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPC3032AT, ATA DISK drive
hdb: ST36530A, ATA DISK drive
keyboard: Timeout - AT keyboard not present?(f4)
hdc: CD-512E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 6335280 sectors (3244 MB), CHS=6704/15/63
hdb: 12715920 sectors (6511 MB) w/448KiB Cache, CHS=13456/15/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [785/128/63] p1 p2 p3
 /dev/ide/host0/bus0/target1/lun0: [PTBL] [791/255/63] p1 p2
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 124988k swap-space (priority -1)
Adding Swap: 136512k swap-space (priority -2) 
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
Real Time Clock Driver v1.10e
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
tulip0:  Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
tulip0:  Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block.
tulip0:  Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block.
tulip0:  Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0:  MII transceiver #5 config 3100 status 786b advertising 01e1.
eth0: Digital DS21143 Tulip rev 17 at 0xec00, 00:00:F8:78:05:25, IRQ 10.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
01:09.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xdcc0. Vers LK1.1.16
kjournald starting.  Commit interval 5 seconds 
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,66), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: 21143 100baseTx sensed media.
eth0: Setting full-duplex based on MII#5 link partner capability of 41e1.

Staughton fstab

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>               <dump>  <pass>
/dev/hda3       /               ext3    errors=remount-ro       0       1
/dev/hda2       none            swap    sw                      0       0
/dev/hdb1       none            swap    sw                      0       0
proc            /proc           proc    defaults                0       0
/dev/fd0        /floppy         auto    user,noauto             0       0
/dev/cdrom      /cdrom          iso9660 ro,user,noauto          0       0
/dev/hda1       /boot   ext2    defaults                        0       2
/dev/hdb1       /www    ext3    nodev,nosuid,noexec,noatime     0       2

Staughton partition tables (fdisk)

Disk /dev/hda: 128 heads, 63 sectors, 785 cylinders
Units = cylinders of 8064 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hda1   *         1         2      8032+  83  Linux
/dev/hda2             3        33    124992   82  Linux swap
/dev/hda3            34       785   3032064   83  Linux

Disk /dev/hdb: 16 heads, 63 sectors, 158816 cylinders
Units = cylinders of 1008 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/hdb1             1    158816  80043232+  83  Linux

-----